Clamping set for KEYENCE Model series IM-7000
Set with angle base and the essential clamping elements for flexibly and securely holding workpieces during optical measuring operations. Whether with turned, milled, stamped or cast, round, cubic, flat, complex or free-form workpieces - these dk clamping elements guarantee simple and quick positioning and holding for effective and economical use of the measuring equipment. The basic pallet included in the set enables setups away from the metrology equipment which increases the OEE. Straight edges can be layed against the base angle with 5 mm serrations without affecting the optical measurability. This fixed stop also enables very light parts to be held that may move during lateral probing which would negatively effect the measuring results.
Set contents
269001 Base angle incl. fastening on IM 7000/Rails toothed one side with T-slot for KEYENCE 7030 1x
345821 Basic pallet /Size: 195x100 mm. View window: 160x72 mm With T-slot and M6 fastening thread 1x
349600 Tailstock pair incl. centres/Centres Ø12 mm / 60°. With T-slot-block 1x
349720 Hollow centre 90°/Clamping range 2 - 15 mm. Gap width 1 mm. For mounting in tailstock 2x
267910 V-block support 90°/For horizontal and vertical mounting of V-blocks With T-slot-blocks 1x
267900 V-block 120° with spring clamp/Clamping range 2-25 mm. Mounting on V-block support or SWA5 connection. 1x
268000 V-block 120° with magnetic insert/Clamping range 2-25 mm. Mounting on V-block support or SWA5 connection. 1x
314900 Rotary swivel mount/Centre height: 23 mm. With SWA5 connection 1x
283800 Precision mini chuck/Internal holding: 0-5 mm. External holding: 5-9 mm. With SWA5 connection 1x
265700 Small parts clamp with stepped profile/Clamping width: 0-1.6 mm Clamping breadth: 1.5 mm. With SWA5 connection 1x
268600 Mount for spring clamps/Length: 30 mm. Mounting in T-slot 2x
269100 Spring clamp, round 34 mm/For vertical clamping To be used with mount for spring clamps 1x
269043 Column Ø4 mm for spring clamps/With M4 thread. Length: 50 mm. Mounting with T-slot-block or directly on measuring table 1x
347700 T-slot-block M4/For Ø4 mm column 1x
269038 Spring clamp round 40 mm/For vertical clamping To be used with column Ø4 mm for spring clamps 1x
349100 Spring clamp horizontal 34 mm, left/To be used with mount for spring clamps, clamping direction left 1x
349200 Spring clamp horizontal 34 mm, right/To be used with mount for spring clamps, clamping direction right 1x